AutoCAD Exam Questions And Answers
(261).jpg "AutoCAD Exam Questions And Answers - Quiz")
Preparing for the AutoCAD exam? Play this informative quiz that contains a wide range of questions to help in your preparation. AutoCAD is a software application developed by Autodesk, which is marketed towards those in a number of different industries where designs for blueprints, buildings, bridges, computer chips, and more are often required. Do you know all about the application and how to use it? Let’s find out in this AutoCAD exam. If you like this quiz, share it with your friends and peers. All the best!
Questions and Answers
- 1.
By default, AutoCAD has the following workspaces.
- A.
2D Drafting & Annotation
- B.
3D Modeling
- C.
My workspace
- D.
AutoCAD Classic
Correct Answer(s)
A. 2D Drafting & Annotation
B. 3D Modeling
D. AutoCAD ClassicExplanation
AutoCAD has multiple workspaces that users can choose from based on their preferences and needs. The given answer lists the default workspaces in AutoCAD, which are 2D Drafting & Annotation, 3D Modeling, and AutoCAD Classic. These workspaces cater to different design tasks and provide specific tools and settings to enhance productivity. The 2D Drafting & Annotation workspace is suitable for creating 2D drawings and annotations. The 3D Modeling workspace is designed for creating 3D models and visualizations. The AutoCAD Classic workspace provides a familiar interface similar to older versions of AutoCAD for users who prefer a traditional setup.Rate this question:
-
- 2.
Which Key do you press to cycle through the available snap points?
- A.
Ctrl
- B.
Shift
- C.
Tab
- D.
Alt
Correct Answer
C. TabExplanation
To cycle through the available snap points, you press the Tab key. The Tab key is commonly used to navigate between different elements or fields within a window or application. In this context, pressing Tab allows you to move sequentially through the snap points, which are specific locations on the screen where windows or objects can be "snapped" or aligned.Rate this question:
-
- 3.
One of the below options is wrong about the type of AutoCad drawing units. Which one is it?
- A.
Architectural
- B.
Engineering
- C.
Millimeter
- D.
Decimal
Correct Answer
C. MillimeterExplanation
The given options represent different types of AutoCad drawing units. Architectural and Engineering are commonly used types of units in AutoCad. Decimal is also a valid type of unit that represents measurements in decimal format. However, Millimeter is not a valid type of unit in AutoCad. This suggests that Millimeter is the wrong option among the given choices.Rate this question:
-
- 4.
Object snap tracking works in combination with object snaps to enable you to temporarily acquire and track up to how many points?
- A.
One
- B.
Two
- C.
Five
- D.
Seven
Correct Answer
D. SevenExplanation
Object snap tracking allows you to temporarily acquire and track up to seven points in combination with object snaps. This feature is useful when you need to align objects precisely or when you want to create objects at specific distances or angles from existing points. By enabling object snap tracking, you can easily reference multiple points while drawing or editing objects in a CAD program.Rate this question:
-
- 5.
Which of the following settings can be made for polar tracking?
- A.
Increment angle
- B.
Additional angles
- C.
Track using all polar angles settings
Correct Answer(s)
A. Increment angle
B. Additional anglesExplanation
The settings that can be made for polar tracking are the increment angle and additional angles. The increment angle allows the user to specify the angle at which the polar tracking should occur, while the additional angles allow for multiple angles to be tracked simultaneously. These settings are useful for accurately drawing and aligning objects in a polar coordinate system.Rate this question:
-
- 6.
With a hot grip, which of these editing tasks can you perform?
- A.
Move
- B.
Offset
- C.
Rotate
- D.
Scale
Correct Answer(s)
A. Move
C. Rotate
D. ScaleExplanation
With a hot grip, you can perform the tasks of moving, rotating, and scaling. A hot grip is a feature in editing software that allows you to manipulate objects or elements within a design or image. By selecting a hot grip, you can easily move the object to a different location, rotate it to a desired angle, or scale it up or down in size. These editing tasks are commonly used to adjust the placement, orientation, and size of elements in a design or image to achieve the desired visual outcome.Rate this question:
-
- 7.
In order to move an object, ________________.
- A.
Select a base point, followed by a point to define where the object is moving to.
- B.
Use the Displacement option.
- C.
Select an object for grips, then move.
- D.
Above all
Correct Answer
D. Above allExplanation
The phrase "Above all" suggests that there is a more important or crucial step or consideration when it comes to moving an object. This implies that there may be other options or steps mentioned in the previous answer choices, but the most important thing to remember or prioritize is "Above all".Rate this question:
-
- 8.
Copy command also creates Multiple copies of an object.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The statement is true because the copy command is used to duplicate or create multiple copies of an object. This command allows users to make exact replicas of an object, which can be useful in various scenarios such as creating backups or distributing multiple copies of the same file or document.Rate this question:
-
- 9.
What is the angle that you use to rotate the chair from point A to point B?
- A.
90
- B.
-90
- C.
-270
- D.
None
Correct Answer
B. -90Explanation
The angle of -90 degrees is the correct answer because it represents a clockwise rotation of the chair from point A to point B. A negative angle indicates a rotation in the opposite direction of the positive angle, which in this case would be counterclockwise. Therefore, a rotation of -90 degrees would correctly describe the movement of the chair from point A to point B.Rate this question:
-
- 10.
If you need the text to be reversed, when you mirror the text, then you need to set:
- A.
MIRRTEXT to 0
- B.
MIRRTEXT to 1
- C.
TEXTMIRR to 0
- D.
TEXTMIRR to 1
Correct Answer
B. MIRRTEXT to 1Explanation
Setting MIRRTEXT to 1 will allow the text to be reversed when mirrored. This means that when the text is mirrored, it will appear as a mirror image of the original text, with the letters flipped horizontally. By setting MIRRTEXT to 1, the software will recognize that the text needs to be reversed when mirrored and will apply the necessary transformation.Rate this question:
-
- 11.
In order to get the below result using Object A, you have to set the number of rows and columns to:
- A.
4,1
- B.
4,2
- C.
4,3
- D.
4,4
Correct Answer
B. 4,2Explanation
To achieve the given result using Object A, you need to set the number of rows to 4 and the number of columns to 2. This configuration will create a grid with 4 rows and 2 columns, resulting in a total of 8 cells.Rate this question:
-
- 12.
When using copy with grips, select copy after you have selected an option, such as Move, Mirror, Rotate, Scale, or Stretch.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
When using copy with grips, selecting the copy option after selecting an action like Move, Mirror, Rotate, Scale, or Stretch allows you to create a duplicate of the selected object while also performing the chosen action. This means that after selecting an option, you can then use grips to manipulate the object and create a copy of it in the desired location or orientation. Therefore, the statement "True" accurately explains this process.Rate this question:
-
- 13.
By selecting which one of the following, the objects on the layer are not visible and are not considered when the drawing is regenerated?
- A.
When you off the layer
- B.
When you froze the layer
- C.
When you lock the layer
- D.
None
Correct Answer
B. When you froze the layerExplanation
When you freeze a layer in a drawing, the objects on that layer become invisible and are not considered when the drawing is regenerated. Freezing a layer is a way to temporarily hide objects without deleting them. This can be useful when you want to focus on other layers or when you want to reduce the complexity of the drawing by hiding certain elements.Rate this question:
-
- 14.
When you use the Match Properties command, you can select multiple source objects.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement is false because when you use the Match Properties command, you can only select one source object at a time. The command allows you to match the properties of one object and apply them to another object, but it does not allow for selecting multiple source objects simultaneously.Rate this question:
-
- 15.
Using object snaps to select points for Inquiry commands is Critical.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Using object snaps to select points for Inquiry commands is critical because object snaps allow for precise and accurate selection of specific points on objects. This is important when using Inquiry commands, such as measuring distances or angles, as it ensures that the measurements are taken from the intended points on the objects. Without object snaps, there is a higher risk of selecting incorrect points and obtaining inaccurate measurements. Therefore, using object snaps is critical for the proper functioning of Inquiry commands.Rate this question:
-
- 16.
What happens if you fillet these two lines with the radius of 0?
- A.
Cannot fillet
- B.
Sharp corner
- C.
None
Correct Answer
B. Sharp cornerExplanation
If you fillet two lines with a radius of 0, it means that you are trying to create a rounded corner between the two lines without any curvature. However, since a radius of 0 means no curvature, it is not possible to create a fillet in this case. Therefore, the correct answer is "Sharp corner," indicating that the corner between the two lines remains sharp and angular.Rate this question:
-
- 17.
Which of the following can be joined using the Join command?
- A.
A
- B.
B
- C.
C
- D.
D
Correct Answer(s)
A. A
C. CExplanation
The Join command can be used to combine two or more tables based on a common column or key. In this case, option A and C can be joined using the Join command.Rate this question:
-
- 18.
The following are some of the properties and settings that you can save in a layout, except _____________.
- A.
Plot scale
- B.
Paper size
- C.
Line weight
- D.
Drawing orientation
Correct Answer
C. Line weightExplanation
In a layout, you can save properties and settings such as plot scale, paper size, and drawing orientation. However, you cannot save the line weight in a layout. Line weight refers to the thickness or width of lines in a drawing, and it is typically set within the drawing itself rather than the layout.Rate this question:
-
- 19.
You can set viewport scale factor by _______________.
- A.
Typing vscale
- B.
Typing vpscale
- C.
Typing viewportscale
- D.
None
Correct Answer
D. NoneExplanation
The question asks about setting the viewport scale factor, and the correct answer is "None." This means that there is no specific command or action mentioned in the options that can be used to set the viewport scale factor. Therefore, none of the given options are correct for setting the viewport scale factor.Rate this question:
-
- 20.
What happens when you set VPROTATEASSOC System Variable to 0?
- A.
When a viewport is rotated, the view inside is not rotated.
- B.
When a viewport is rotated, the view inside is rotated to match the rotation of the viewport.
Correct Answer
A. When a viewport is rotated, the view inside is not rotated.Explanation
When the VPROTATEASSOC System Variable is set to 0, it means that the view inside a rotated viewport will not be rotated. This means that even if the viewport itself is rotated, the content inside the viewport will remain in its original orientation and will not be affected by the rotation of the viewport.Rate this question:
-
- 21.
With the Multiline Text editor, you can do all of the following, except:
- A.
Insert numbered and bulleted lists
- B.
Insert specific drafting and engineering symbols
- C.
Insert pictures
- D.
Create Fields such as date, time, and author.
Correct Answer
C. Insert picturesExplanation
The Multiline Text editor allows users to perform various tasks such as inserting numbered and bulleted lists, inserting specific drafting and engineering symbols, and creating fields such as date, time, and author. However, it does not allow users to insert pictures.Rate this question:
-
- 22.
If you copy and paste text from another drawing or insert a block into a drawing that has the same Text Style name with different properties, the text properties of the host drawing will take precedence. True/False?
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
When you copy and paste text from another drawing or insert a block into a drawing, if the Text Style name is the same but the properties are different, the text properties of the host drawing will take precedence. This means that the text in the host drawing will retain its own properties and will not be affected by the properties of the copied or inserted text. Therefore, the correct answer is True.Rate this question:
-
- 23.
What is the command used to draw the above dimension line?
- A.
Dimjogged
- B.
Dimjogline
- C.
Joggeddim
- D.
Joggedline
Correct Answer
B. DimjoglineExplanation
The command used to draw the above dimension line is "Dimjogline".Rate this question:
-
- 24.
If you modify a dimension style, all dimensions using that style in the drawing update automatically. True/False?
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
When you modify a dimension style in a drawing, all dimensions that are using that style will update automatically. This means that any changes made to the dimension style, such as text height, arrow style, or units, will be applied to all dimensions in the drawing that are using that particular style. Therefore, the statement is true.Rate this question:
-
- 25.
The multi-leaders 4,8,9 represent:
- A.
Aligned Multileaders
- B.
Vertical Multileaders
- C.
Collected Multileaders
- D.
Horizontal Multileaders
Correct Answer
C. Collected MultileadersExplanation
The correct answer is "Collected Multileaders". This means that the multi-leaders 4, 8, and 9 are grouped together or collected as a single entity. They may be used to represent multiple objects or elements in a drawing that are related or connected to each other.Rate this question:
-
- 26.
What type of Island detection type is this?
- A.
Inner
- B.
Outer
- C.
Ignore
- D.
Normal
Correct Answer
D. NormalExplanation
This question is asking about the type of island detection. The options provided are Inner, Outer, Ignore, and Normal. Based on the given options, it can be inferred that Normal is the correct answer as it is a type of island detection.Rate this question:
-
- 27.
Using the Purge command, we can purge referenced blocks. True/False?
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement is incorrect. The Purge command in AutoCAD is used to remove unused named objects, such as layers, linetypes, and text styles, from the drawing. It does not purge referenced blocks. Therefore, the correct answer is False.Rate this question:
-
- 28.
When you Explode a block, the geometry returns to its original properties. True/False?
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Exploding a block means breaking it down into its original components, such as lines, arcs, and text. When a block is exploded, the geometry returns to its original properties, meaning that the individual elements regain their independent characteristics and can be edited separately. Therefore, the statement "When you Explode a block, the geometry returns to its original properties" is true.Rate this question:
-
- 29.
Which options are used to draw this polyline?
- A.
Line
- B.
Arc
- C.
Tamper
- D.
Width
Correct Answer(s)
A. Line
B. Arc
D. WidthExplanation
The options "line", "arc", and "width" are used to draw this polyline. A polyline is a series of connected straight lines and curves. The "line" option is used to draw straight segments of the polyline. The "arc" option is used to draw curved segments of the polyline. The "width" option is used to specify the thickness or width of the polyline. By using these three options, one can create a polyline with both straight and curved segments, and control its thickness.Rate this question:
-
- 30.
You cannot fillet or chamfer the first segment of a polyline with the last segment of the same polyline. True/False?
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
When filleting or chamfering, you are essentially creating a rounded or beveled corner between two segments of a polyline. However, in order to do this, there must be two separate segments to work with. If the first segment and the last segment of a polyline are the same, there is no separate segment to create the fillet or chamfer with. Therefore, it is true that you cannot fillet or chamfer the first segment of a polyline with the last segment of the same polyline.Rate this question:
-
- Adobe Quizzes
- Adobe Photoshop Quizzes
- Apache Quizzes
- CRM Quizzes
- Facebook Messenger Quizzes
- jQuery Quizzes
- Knowledge Base Quizzes
- Manual Testing Quizzes
- Open Source Quizzes
- Rational Quizzes
- SaaS Quizzes
- SAP CRM Quizzes
- Selenium Quizzes
- Software Fundamentals Quizzes
- Software Testing Quizzes
- VMware Quizzes
- Xenapp Quizzes
Back to top